The TriField Meter is the only one which combines magnetic, electric, and radio/microwave detection in one package. This meter combines all these unique features with affordable pricing for fast, reliable measurements of electromagnetic pollution: Continuous sampling analog readout 3-axis magnetic sensitivity Two separate scales for magnetic field readings Hand-held portability and simplicity. Our Tri Field Meter XE100 set is calibrated for the EU at 50 Hz (see warning below)
TriField Meter gives you a good EMF impression
The TriField Meter XE100 will give you a good impression of the EMF pollution from these "hot spots" in your home, office, or work environment so you can take steps for "prudent avoidance": * poorly grounded wiring * microwave oven doors * dimmer switches and halogen trafo's * strong analog RF transmitters * automobiles * TV's & computers and their power supply's * other electronic equipment TriField Meter XE100 bestellen in onze shop
Tri Field Meter XE100 set is gekalibreerd voor de EU bij 50 Hz
Meet zelf de hoeveelheid straling in je omgeving
TriField XE100 bestellen in Https Secure Shop
Warning If You Live Outside The US
Warning : The EMF meters sold by Amazon.com (and other American websites) are the 60Hz models which are calibrated for the American market. If you live in Europe or pretty much anywhere outside the US you need to buy a meter which is calibrated at 50Hz. So the meters being sold by Amazon.com will not work properly if you live outside the US. You can check what the electricity supply frequentie is in your country. If you live outside the US you can buy a Trifield meter that will work in your country from this company. We have the Trifield Meter XE100 50Hz in stock. (= fast delivery)
Trifield XE100 meter is op voorraad- Snel geleverd
Kenmerken Trifield XE100
Detects the three types of electromagnetic pollution: AC magnetic fields, AC electric fields, and radio/microwaves. AC magnetic and electric fields are 3-axis, allowing quick accurate readings regardless of meter orientation. Two magnetic ranges cover 0.2-100 milligauss. This is sufficiently sensitive to detect the background field almost anywhere (except far from civilization), while measuring up to very strong AC fields. Electric range covers 5-1000 V/m (or .5-100 kV/m with original version of the Trifield Meter) Radio/microwave covers 10 to 1000 microwatts/square cm which includes the maximum permissible public exposure levels in all countries. Operates about 40 hours on replaceable standard 9V battery, has a low battery indicator. Analog (needle-type) display has very fast response time compared to digital. (However, AlphaLab also manufactures digital meters.)
Specificaties Trifield XE100
AC Magnetic Fields: (3-axis; shows true magnitude) Frequency Range: 40 Hz – 100 KHz (see frequency weighting) Accuracy @ 60 Hz (50 Hz): +/- 20% of reading Range/Resolution (@ 60 Hz or 50 Hz): 100 milligauss / 0.2 milligauss Standard Version Frequency Weighting: *Sensitivity is proportional to frequency from 40 Hz to 500 Hz; flat from 500 Hz to 2000 Hz *Sensitivity is inversely proportional to frequency from 2K Hz to 100K Hz Flat Frequency Version: +/- 20% from 50 Hz to 500 Hz; inverse frequency above 500 Hz AC Electric Fields: (3-axis; however, note that E-field is affected by the body position) Frequency Range: 40 Hz – 100 K Hz (see frequency weighting) Accuracy @ 60 Hz (50 Hz): +/- 30% of reading Range/Resolution: 1000 V/m / 5 V/m (Original Version: 100 KV/m / 0.5 KV/m) Frequency Weighting: Same as magnetic (above). Frequency Range: 50 MHz – 3000 MHz (3 GHz) Radio Microwave: 1 Axis (detect E field) Range/Resolution: 1 mW/cm2 / 0.01 mW/cm2 Accuracy: ½ x to 2 x of reading Meter Size: 5.0 x 2.6 x 2.4 in; 129 x 67 x 62 mm Weight: 8 oz Battery: 9 volt alkaline (~ 40 hour life) / "Low Battery" indicator
We have the Trifield Meter XE100 50Hz in stock for fast shipping.
For measuring high frequencies (over 2 Ghz up to 8 GHz) the Acoustimeter will give more detailed and accurate information.